Paint Mixing Rooms
Air flows in through the filtered air intake plenum (located in the ceiling toward one end of the booth) downward through the work area and into the exhaust chamber located in the lower opposite end of the room. Filtered exhaust air is drawn through the exhaust plenum and is discharged upward into the atmosphere through the exhaust stack.
Lighting Features
Bright full booth illumination is provided by ten four-tube, 48”, 32-watt, fluorescent light fixtures in the angled ceiling panels and side walls. Each is sealed behind clear, tempered safety glass. All fixtures are UL listed and approved for their intended use and placement. The light tubes are not furnished with the fixtures
Construction Features and Quality Standards
All cabin and plenum sections are made with 18-gauge steel. The personnel access door is pre-hung in heavy gauge galvanized steel frames for easy installation. Brixon latches are provided for each door opening. One 14”x48” observation window is standard in all paint mix room personnel doors.
Exhaust system is driven by a 14” diameter tube axial fan with a 1/2 HP motor, producing 1930 SCFM at ½” static pressure.
All hardware, filters and sealants needed for the booth installation are included. The control panel and other electrical components may be purchased separately.<p>
PMR-0812
Interior Dimensions: 8’W x 8’H x 12’L
Exterior Dimensions: 8’4”W x 8’2”H x 14’6” L
Access Door: 1
Add Powder Coating For Only $799.00
Call for a list of available options and other sizes 1-800-637-4027 |
